background image

SETUP & OPERATION 

STEP 2: UNLOCK AND OPEN THE SAFE   

Your safe includes 2 Entry keys 
and 1 Emergency Access key,. 

1.

On the keypad, press

ENTER

” then “

7 7 7 7

” then

ENTER

” again.  If the correct

code has been entered, a
musical code will chime and
the lock will click open.

1. 

2.

Insert the “Entry Key” and turn
all the way to the right 
(clockwise).  Rotate the
handle upwards and pull the
door open.

  2.

TO LOCK THE SAFE:

Carefully close the door and rotate the handle downwards.  Now turn the key
all the way to the left and remove from the safe.  The safe is now in locked
position.  The Entry key and security code will be needed to open.

EMERGENCY ACCESS KEY 

If you have forgotten your personal access code or the electronic lock is not 
functioning properly, you can use the Emergency Override Key to gain access. 

Insert the Emergency Access key 
into the lock, turn all the way to the 
left (counterclockwise), and lift 
handle to open safe. 

SETUP & OPERATION 

STEP 3: PROGRAM NEW USER CODES

 

1.

With the door open, press the small black button located near the inside
center of the door.

2.

You will hear a musical chime and the small green LED will glow. 

NOTE

: If

the green LED stops glowing, you need to press the black button and start
again.

3.

Using the digital keypad, you now have approximately 5 seconds to begin
entering a new personal code using a minimum of 4 digits to a maximum of
16 digits.

4.

Once you have entered new code, press ENTER key.  You will hear a chime
indicating new code is now programmed into memory.

Before closing and locking the safe door, you should enter your new code to 
confirm that it is correct and unlocks the safe. 

For future reference, your new code should be recorded and placed in a secure 
location away from the safe.

 

SECURITY FEATURES

 

SECURITY LOCKOUT PERIOD: 

If an incorrect code is entered, the LED’s will blink and a special two-tone 
alarm will sound.  You should then re-enter the proper code.  If an incorrect 
code is entered 4 times, the safe will enter a security lockout period of about 
5 minutes.  During this time, you will not be able to enter the safe. 

http://www.monomachines.com/

https://www.supplychimp.com

Summary of Contents for 2208






Reviews: