Performance Series Network Video Recorder User Guide
90
Figure 8-13 IPC External Alarm Configuration Tab
2.
On the
IPC Ext
tab, select the channel to configure the external alarm settings from the
drop-down menu.
3.
Select the
Enable
check box to enable alarm detection of the selected alarm input.
4.
In the
Type
box, select the alarm input type:
NC
(Normal Close) or
NO
(Normal Open).
5.
Enter a name for the alarm in the
Alarm Name
field.
To set up alarm input detection periods
1.
On the
Alarm
tab, next to
Period
, click
Set
. The
Set
window opens.
Figure 8-14 Alarm Period Setup
2.
By default, when alarm detection is enabled, it is active all the time. To modify the periods
when alarm detection is active, on each day’s timeline, click the half-hour blocks when you
want alarm detection for the selected alarm input to be
disabled
.
3.
Alternatively, for the day of the week that you want to configure, click
Setup
. The
Period
window opens.
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...
