Performance Series Network Video Recorder User Guide
116
Figure 10-1 General Configuration Tab
2.
On the
General
tab, configure the following settings:
Device Name:
Enter a device name for the NVR.
Device No.:
Enter a device number for the NVR.
Language:
Set the language of the user interface.
Instant Replay:
Set the length of time to play back video using the instant replay playback
function in live view mode. Specify a time between
5
and
60
minutes. The default setting
is
5 min
.
Auto Logout:
Set the length of time the NVR waits before logging out an inactive user.
Specify a time between
0
and
60
minutes. The default setting is
10 min
.
Monitor Channel(s) when logout:
Select the channels that you want to monitor after the
logout.
IPC Time Sync:
Select the check box to have the NVR sync time with connected IP
cameras at a set interval. Set the interval from
1
to
1440
minutes. The default setting is
5
minutes.
Navigation Bar:
Select the check box to display the live view toolbar on the live view
screen. Clear the check box to hide the live view toolbar.
Authentication Mode:
Check to enable the authentication mode for using the keyboard. If
the authentication mode is not applicable to your keyboard, uncheck it.
Mouse Sensitivity:
Set the desired mouse speed using the slider.
3.
Click
Apply
to save your settings.
4.
If you want to save your settings and exit the
SETTING
menu, click
Save
.
Configuring Date and Time Settings
To configure the system time settings
1.
Go to
Main Menu
SETTING
SYSTEM
GENERAL
Date&Time
.
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...
