Performance Series Network Video Recorder User Guide
118
To synchronize the system time with the Network Time Protocol (NTP)
1.
Ensure that the NVR is connected to the Internet.
2.
Go to
Main Menu
SETTING
SYSTEM
GENERAL
Date&Time
.
3.
On the Date&Time tab, click to select the NTP check box.
4.
In the Server box, enter the IP address of the NTP server that you want to use (for example,
time.nist.gov).
5.
Ensure that Port is set to 123.
6.
To change the frequency with which the system time synchronizes with the NTP server,
enter a new time in the Interval box. The default setting is 60 min.
7.
Click Manual Update to manually synchronize your system time with the NTP server.
8.
Click Apply to save your settings.
9.
If you want to save your settings and exit the SETTING menu, click OK.
Configuring Holiday Settings
1.
Go to
Main Menu
SETTING
SYSTEM
GENERAL
Holiday
.
Figure 10-3 Holiday Tab
2.
On the
Holiday
tab, click
Add Holidays
. The
Add Holidays
window appears.
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...
