Performance Series Network Video Recorder User Guide
186
Figure 12-56 UPnP Configuration Interface
2.
Configure the following settings:
Enable
Click to enable or disable UPnP.
LAN IP
Enter the NVR’s IP address from the
TCP/IP
page.
WAN IP
Enter the router’s IP address.
3.
(Optional)
Edit
a mapping relationship from the
Port Mapping List
:
Edit a mapping relationship:
Click the modify icon for the mapping relationship that you
want to edit, and then, in the
Modify
dialog box, edit the
Service Name
,
Protocol
,
Internal
Port
, and/or
External Port
details, as needed, and then click
OK
.
4.
Click
OK
to save your settings.
Configuring SNMP
SNMP allows the communication between the network management work station software
and the proxy of the managed device. It is reserved for a third party developer.
1.
Click
SNMP
under
NETWORK
to open the
SNMP
configuration interface.
2.
Configure the SNMP settings and click
OK
to save your settings.
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...