Performance Series Network Video Recorder User Guide
54
a.
Click to select the found camera.
b.
Click
Add
to add the found device to the
Added Device
list.
Note
If the NVR fails to display the model name of a found device,
click
Device Search
to rediscover the online devices. The model
name should appear in the Found Devices list.
Adding a Camera Manually
Click
Manual Add
and manually configure the following settings:
Table 6-1 Manual Add
Parameter
Function
Manufacturer
Select the manufacturer that applies to your camera from
the list.
IP Address
Enter the IP address for the camera.
TCP Port
Enter the TCP port for the camera. (Optional)
Username
Enter a username.
Password
Enter a password
Channel No.
Enter a channel amount or click the Connect button to get
the channel amount of the remote device.
Note
: We recommend click the Connect button to get
remote device channel amount, the manual add operation
may result in failure if the input channel amount is not
right.
Remote
Channel No.
After getting the remote device channel amount, click
Setup to select a channel.
Note
: Click to select one or more remote channel numbers
here.
Channel
The local channel number you want to add. One channel
name has corresponding one channel number.
Decode buffer
Select from the drop-down menu of options.
Click
OK
. The newly added camera appears in the Added Device list.
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...
