Performance Series Network Video Recorder User Guide
72
Figure 7-11 Network SNMP Settings Window
2.
On the
SNMP
page, select the
Enable
check box to enable SNMP.
3.
Configure the following settings:
Version:
Select the check boxes of the SNMP version that you are using.
SNMP Port:
The default setting is
161
.
Read Community:
The default setting is
public
.
Write Community:
The default setting is
private
.
Trap Access:
Enter the IP address of the computer running SNMP software.
Trap Port:
The default setting is
162
.
4.
If SNMP Version
V3
is selected, the following settings are also configurable:
ReadOnly User:
The default setting is
public
.
Read/Write User:
The default setting is
private
.
Authorize Type:
Select the authorization type,
MD5
or
SHA
, for both the
ReadOnly and Read/Write users. The default setting is
MD5
.
Password:
Enter the authorization passwords for both the ReadOnly and Read/Write
users.
Encryption Type:
Select the encryption type for both the ReadOnly and Read/Write users.
The default setting is
CBC-DES
and is currently the only encryption option.
Password:
Enter the encryption passwords for both the ReadOnly and Read/Write users.
5.
Click
Apply
to save your settings.
6.
If you want to save your settings and exit the
SETTING
menu, click
OK
.
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...
