Performance Series Network Video Recorder User Guide
84
Figure 8-6 Video Loss Configuration Tab
2.
On
the
Video Loss
tab, in the
Channel
box, select the channel (camera) for which you
want to configure video loss detection settings.
3.
Select
the
Enable
check box to enable video loss detection for the selected channel.
4.
To set the periods when video loss detection is active, next to
Period
, click
Set
,
and
then
follow the steps listed in
To set up motion detection periods
5.
To set the actions that you want the system to initiate when a video loss event occurs,
follow the steps listed in
To set up motion detection event actions
6.
Click
Apply
to save your settings.
7.
To
copy
the settings to additional channels, click
Copy
, select the channels to which you
want to copy the settings, and then click
OK
.
Configuring Video Tampering Settings
1.
Go to
Main Menu
SETTING
EVENT
VIDEO DETECTION
Tampering.
Figure 8-7 Video Tampering Configuration Tab
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...
