High / Medium / Low Speed
– Tap lightly to turn the fan on at high, medium or
low speed respectively.
Fan Off
– Tap lightly to turn the fan off.
Light
–Tap lightly to turn light on or off. Hold down for 2 seconds to cycle through
dimmer setting. The light button has an auto resume feature so the light will
reactivate at the same brightness as the last time it was turned off.
NOTE:
The dimmer function does not work with CFL bulbs.
Walk Away Light Delay
– Tap once-the light and fan turn off after 1 minute. Light on
the fan blinks once to confirm function is active. Press any button to cancel function.
Home Shield
– Press and hold the Light and Delay buttons for 3 seconds. Light on
the fan blinks two times to confirm function is active. Fan will be off and the light will
randomly turn on and off while you are away. To deactivate press any button once.
D/O
– Set the switch to “D” for use with incandescent bulbs or “O” for CFL bulbs.
Factory default setting is “O” for use with CFL bulbs.
LEARN
– Synchronizes transmitter and receiver signals.
TRANSMITTER OPERATION (FIG. 4)
HIGH SPEED
MEDIUM SPEED
LOW SPEED
FAN OFF
WALK AWAY
LIGHT DELAY
LIGHT
1. Locate wall mount in a convenient location.
2. Use two screws (included) and wall anchors to install wall mount bracket as
shown in FIG. 5.
• Is the wall switch turned on? Is power turned on at the circuit breaker?
• Is it wired correctly and receiving power? Are the wire connectors tight for
each wire connection?
• Is the fan pull chain set to High and light pull chain set to the On position?
• Is the transmitter battery new and fully charged?
• Learning process between fan and transmitter may not have been successful--
see ACTIVATING THE LEARNING PROCESS.
• Won’t operate at a distance – make sure antenna wire is not obstructed.
The Honeywell Trademark is used under license from Honeywell International
Inc. Honeywell International Inc. makes no representations or warranties with
respect to this product.
This product is manufactured for:
Hong Kong China Electric Appliance Mfg. Co., Ltd.
3059 Forest Hill Irene Rd, Ste 103
Germantown, TN 38138
1-877-580-4359
FCC INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. --Consult the dealer or an
experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the
equipment.
This device complies Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device.
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator and your body.
If you have questions regarding this product, before returning
to your retailer, call our customer service department toll free at
1-877-580-4359.
Printed in China
9059 • rev 050514
This product is warranted to be free from defects in material and workmanship, under
normal use and maintenance, for a period of (1) year from the date of purchase. This
warranty shall not cover any removal or re-installation costs, and shall not apply to: (i)
cosmetic damage, such as scratches, nicks and dents; (ii) any alteration or improper
repair, maintenance, handling, or installation; (iii) the combination of the product with
other systems or components; (iv) consumable parts, such as batteries, including any
deterioration or damage to the product caused by the use of faulty batteries; (v) damage
caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external
causes; (vi) damage caused by service performed by anyone who is not an authorized
service provider; or (vii) damage to a product that has been modified or altered. Your
sole and exclusive remedy for a breach of warranty shall be replacement of the product.
Alternatively, you may return your product to the retailer from which you made your
purchase in accordance with applicable return policies.
The warranties and remedies contained herein are exclusive and in lieu of all other
warranties whether express, implied, or statutory, including any liability arising under any
warranty of merchantability or fitness for a particular purpose, statutory or otherwise. This
warranty gives you specific legal rights, which may vary from state to state. In no event
shall any party be liable for any incidental, special, indirect, or consequential damages,
whether resulting from the use, misuse, or inability to use this product or from defects in the
product. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations may not apply to you.
To obtain warranty service, please call the customer service number below. One of our
customer service representatives will assist you in determining whether you have a warranty
claim and, if so, how to return your product. If you return your product for a warranty claim,
please securely pack your product and include a copy of the original sales receipt, which
is required as the proof of purchase for all warranty claims. You shall be responsible for
shipment and assume all costs and risks associated with any product return.
INSTALLING THE WALL BRACKET
TROUBLESHOOTING
WARRANTY
FIG 4
TRANSMITTER OPERATION
FIG 5
INSTALLING THE WALL BRACKET
Distributed by:
LG Sourcing, Inc.
P.O. Box 1535
N. Wilkesboro, NC 28659
1-877-580-4359
