background image

   Models 5101 & 5102 

Steel Security Safe with Digital Lock  

PACKAGE CONTENTS  

1

 – Steel Security Safe 

1

 – Operation Manual 

2

 – Override Access Keys 

4

 – “AA” Batteries 

1

 – Mounting Kit w/ Bolts

 

DO NOT RETURN SAFE TO STORE! 

If there are any missing parts or you have 
difficulty setting up or operating your safe, 
please contact our Consumer Assistance 
Department by telephone: 

1-877-354-5457

(USA & Canada)

Monday–Friday

7am - 5pm PST

PRODUCT OVERVIEW 

- Safe Entry Knob 

B

   - Override Key Cover  

C

   - Electronic Digital Keypad 

D

   - Safe Cabinet Body 

E

   - Safe Door Assembly 

F

   - Serial Number Label 

IMPORTANT

Remove plastic corners from outside of safe door before operating.  

SETUP 

STEP 1. OPEN SAFE WITH OVERRIDE KEY 

1.

 

Remove override key cover with small screwdriver.

2.

 

Insert override key and turn left to unlock safe.

3.

 

Turn knob to right and open safe door.

STEP 2. INSTALL BATTERIES

 

1.

 

Remove battery compartment (A) cover on inside door.

2.

 

Insert 4 “AA” batteries (included).

3.

 

Replace the battery cover.

4.

 

Do not close door before testing digital lock.

STEP 3. TEST DIGITAL LOCK  

1.

 

With door open, turn knob left to put locking door bolts (B) in lock position.

2.

 

Remove override key and store in a secure place. 

NEVER STORE KEYS INSIDE SAFE!

3.

 

Enter the preset pass code: “1”-“5”–“9”-“b” .

4.

 

Turn knob to right within 5 seconds.

5.

 

Lock bolts should recede into the unlocked position.

STEP 4. PROGRAM A NEW PASSCODE 

1.

With door open, press red reset button (C) inside door.

2.

Yellow light is on, enter new pass code in 30 seconds.

3.

Enter personal code (3 to 8 digits) followed by “A” or “B”.

4.

Safe will beep and yellow light will turn off.

NOTE: The factory pre-set code will not work after a new pass code is programmed.

OPERATION 

TO OPEN THE SAFE 

1.

 

To unlock and open safe, enter the pass code followed by “A” or “B”.

2.

 

Turn door entry knob to the right and open door.

TO CLOSE THE SAFE 

1.

 

Close the door and hold it in the closed position.

2.

 

Turn door entry knob to left to engage the lock bolts and lock safe.

https://www.supplychimp.com

Summary of Contents for 5101

Page 1: ...antie au sujet de ce produit La marca Honeywell se usa bajo licencia otorgada por Honeywell International Inc Honeywell International Inc no hace ningún tipo de representación ni garantía con respecto a este producto Models Modèles Modelos 5101 5102 STEEL SECURITY SAFE COFFRE FORT DE SÉCURITÉ EN ACIER CAJA DE SEGURIDAD DE ACERO Read this manual carefully and never store it inside the safe Read thi...

Page 2: ...cover on inside door 2 Insert 4 AA batteries included 3 Replace the battery cover 4 Do not close door before testing digital lock STEP 3 TEST DIGITAL LOCK 1 With door open turn knob left to put locking door bolts B in lock position 2 Remove override key and store in a secure place NEVER STORE KEYS INSIDE SAFE 3 Enter the preset pass code 1 5 9 b 4 Turn knob to right within 5 seconds 5 Lock bolts s...

Page 3: ...nter pass code 3 to 8 digits followed by A or B 5 Safe will beep and yellow light will turn off SAFE SERIAL NUMBER Whenever contacting our Consumer Assistance Department you will need to provide the them with the serial number of your safe The serial number tag is located on the lower right corner on the front of the safe IMPORTANT Do Not Remove Tags This is needed if your safe fails or you lose y...

Page 4: ...itial retail purchase and is not transferable You must keep the original sales receipt Proof of purchase is required to obtain warranty performance LHLP Inc dealers service centers or retail stores selling this product do not have the right to alter modify or in any way change the terms and conditions of this warranty This warranty does not apply to the finish on the product This warranty does not...

Reviews: