TO OPEN THE SAFE
1. Insert key into keyhole as shown (Figure 1).
2. Turn key clockwise to the right. Bolts will recede into safe door(Figure 2).
3. Pull door open using key (Figure 3).
TO CLOSE THE SAFE
1. Push door closed until it stops and turn key counter clockwise to the left (Figure 1).
2. Bolts will move into the locked position.
3. Remove key and store in a safe place away from the safe (Figure 2).
For additional convenience, this safe includes an adjustable shelf with 4 shelf clips. If you wish to
use the provided adjustable shelf, follow the steps below. Otherwise store it and the clips in a safe
location for later use.
SHELF INSTALLATION:
1. Hold each shelf clip in an upright position and Inset into the pre-knotched holes located on the wall
of the safe insuring that all 4 clips are equally inserted in height (Figure 1).
2. Lower each shelf clip into a horizontal position to lock it in place (Figure 2).
3. You must angle the shelf to install it inside the safe and then rotate it into position (Figure 3).
4. The shelf can then be placed to sit on top of each of the 4 shelf clips (Figure 4).
Figure 1
Figure 1
Figure 1
Figure 2
Figure 2
Figure 2
Figure 3
Figure 3
Figure 4
2
USING THE OFFICE / SECURITY SAFE
INSTALLING ADJUSTABLE / REMOVABLE SHELF
