LS10144-001SK-E
Programming
9-4
9.3
Zone
Through the zone option in the program menu you can edit and view zone points. Selections made here affect all
detectors and switches in the zone. Up to 999 zones can be used in the system.
9.3.1
Edit Zone
Features that can be edited through the edit zone option are zone name, zone properties (which includes zone
type and detector sensitivity), and zone accessory options.
To edit a zone, follow these steps:
1.
Enter the installer code. The panel will automatically go the main menu.
2.
Select 7 for Program Menu.
3.
Press 2 to enter zone menu.
4.
Press 1 to edit a zone.
5.
Enter the zone number, then press ENTER.
9.3.1.1 Edit Zone Name
6.
Press 1 to edit the selected zone name.
You can use words to display a descriptive name for a zone.
Note: See Appendix B for editing names.
9.3.1.2 Edit Zone Properties
Zone properties consist of alarm delay characteristics, heat detector sensitivity.
1.
Do steps 1 through 5 of Section 9.3.1.
2.
Press 2 to edit the properties of the selected zone.
Figure 9-2 Editing Zone Properties
Alarm Delay Characteristics
The programmed zone type is provided for user reference only. To modify the zone type, use the HFSS
Honeywell Fire Software Suite.
