background image

68

Glossary

PAL  (Phase Alternate Line)  

 A standard of specifications for television transmission for 

color TV signals used in West Germany, England, Holland, Australia, and several other 
countries. It uses an interlaced format with 625 lines per frame at 25 frames per second.

PoE  (Power over Ethernet)  

 A method of powering Ethernet-connected devices via the 

Ethernet cabling as defined in the IEEE 802.3af standard.

Shutter Speed  

The speed at which the charge is read out from the imager chip. Adjusts 

the light sensitivity of the camera. A faster (briefer) shutter speed can arrest the motion of a 
fast moving object (reduce image blur), rendering it sharp. Fast shutter speeds allow less 
light to all on the CCD and can darken the image. For fast shutter speeds, ensure there is 
adequate lighting. Usually selected using DIP switches on the side of the camera.

Subnet Mask  

A number used to identify a subnetwork so that an IP address can be shared 

on a LAN.

True Day/Night  

The incorporation of a moving mechanical IR filter within the camera 

ensures true 24 hour surveillance, providing high quality color images during the day and 
similar quality black & white images at night when used with IR lighting.

UPS (Uninterruptible Power Supply)  

These are power supplies used in the majority 

ofhigh security systems, whose purpose is to back up the system when the main power 
fails.

Summary of Contents for 720P











































































Reviews: