Honeywell 8712009, Installation & Operation Manual

Page 11

DELETE ONE EXISTING OR PRESET USER CODE
The unit comes with a factory User ID        = 01 for User Code        = 1234.  
IMPORTANT: To delete 1 User Code      , the lock must have more than 1 User Code       
in its database.

SET OR CANCEL AUTO LOCK 
You can set the lock to automatically close after each time the lock is opened. Time 
value range = 20 - 900 seconds, enter the following:

DELETE ALL USER CODES
IMPORTANT: this will delete the user codes but not the programming code, enter 
the following.

Hear 1 beep and Light Indicator illuminates green.

Set Auto Lock: 

Hear 1 beep and Light Indicator illuminates green.

To cancel Auto Lock set the time to 00, enter the following:

Cancel Time Value Auto Lock: 

Hear 1 beep and Light Indicator illuminates green.

Hear 1 beep and Light Indicator illuminates green.

2                 Existing    

         re-enter

5                 Time Value

5                 00

3                 re-enter

DELETING USER CODES

AUTOMATIC LOCK FUNCTION

PC

PC

PC

PC

PC

ID

UC

UC

UC

ID

ID

DISABLE: 
While in Auto-Lock mode, unlock door using       , within 10 seconds you must turn the  
locking knob by hand to the locked position, wait more than 2 seconds then turn the 
locking knob back to the unlock position. The Auto-Lock mode is now disabled.

RESTORE:
To restore the Auto-Lock funtion, you can turn the locking knob by hand to the locked 
position, wait more than 2 seconds or press the 

 Lock button on the keypad.

TEMPORARILY DISABLE AUTO-LOCK

PC