– 25 –
Fire Alarm System (If Installed - cont’d)
Using the Panic Key(s)
Assigned for FIRE
Emergency
A key or key pair may have been assigned for manually initiating a FIRE alarm. See
the
Panic Keys
section for key assignments.
For convenience, indicate the key or key pair assigned for fire below.
I n d i v i d u a l K e y s
A
B C
Press the individual key assigned for fire for 2 seconds.
O R
K e y P a i r s
1 O F F
and
∗
R E A D Y
∗
R E A D Y
and
#
3 S T A Y
and
#
Quick Guide to Basic System Functions
Quick Guide to Basic System Functions
Quick Guide to Basic System Functions
Quick Guide to Basic System Functions
FUNCTION PROCEDURE
COMMENTS
Check Zones
Press READY key.
View faulted zones when system not
ready.
Arm System
Enter code. Press arming key desired:
(AWAY, STAY, NIGHT-STAY (Internal),
MAXIMUM, INSTANT)
Arms system in mode selected.
Quick Arm
(if programmed)
Press #. Press arming key desired:
(AWAY, STAY, MAXIMUM, INSTANT)
Arms system in mode selected, quickly
and without use of a code.
Bypass Zone(s)
Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Bypassed zones are unprotected and will
not cause an alarm if violated.
Quick Bypass
(if programmed)
Enter code. Press BYPASS key + [#].
Bypasses all faulted zones automatically.
Silence Sounders
Burglary:
Fire:
"Check":
Enter code. Press OFF key.
Press OFF key.
Press any key.
Also disarms system. Memory of alarm
remains until cleared.
Memory of Alarm remains until cleared.
Determine cause.
Disarm System
Enter code. Press OFF key.
Also silences sounders. Memory of alarm
remains until cleared.
Clear Alarm Memory
After disarming, enter code again.
Press OFF key again.
Keypad beeps rapidly on entry if alarm
has occurred while absent. Alarm display
will remain upon disarming until
cleared.
Press the key pair
assigned for fire
at the same time.
