ENGLISH
6
FIRST TIME OF USE
1.
Read through all the instructions before starting to use
the fan heater.
2.
Unpack the fan heater and the power cord. Remove all
packaging materials and dispose of them for recycling.
3.
Before starting to use the fan heater, mount it according
to the instructions for „wall mounting“.
WALL MOUNTING
1.
Mount the fan heater vertically on a straight wall. Strict-
ly observe the safety distances shown in Fig. 1 and 2. Also
comply with your local safety regulations.
Do not
mount
the fan heater on a combustible or instable surface (e.g.
wood or plastic) or under the ceiling. Fire hazard!
2.
Drill 3 holes of 6mm diameter, spaced as shown in Fig. 3.
3.
Insert the 3 plugs into the holes. Screw the two upper
screws in. 8mm of the screw heads must stick out of the
wall (Fig. 4).
4.
Hook the fan heater firmly onto the two screw heads by
exactly matching the indents at the rear of the fan heater to
the screws. Before letting go of the appliance, make sure
that the fan heater is hooked firmly onto the two screws so
that it cannot fall off.
5.
Fix the fan heater to the wall with the lower screw. The
fan heater must be fixed so securely that it cannot be
moved (Fig. 5) and cannot become loose and fall off.
6.
Check that the fan heater is mounted securely and can-
not fall off.
USER INSTRUCTIONS
BH-888E – Rotary thermostat switch
1.
Make sure that the rotary thermostat switch (2) is in its
lowest position ( ) (3). Insert the power plug into the power
socket.
Do not touch the power cord with wet hands.
*
2.
Make sure that the air intake vent (6) and air outlet vent
(7) are not covered up and that no objects have managed to
get into them.
The air intake vent (6) and air outlet vent (7)
must always be free when the appliance is in use.
3.
Turn the rotary thermostat switch (2) to its highest
position (4). The power control lamp lights up. (1). The fan
heater is now operating with an output of 2000 W.
4.
When the desired room temperature has been reached,
turn the rotary thermostat switch (2)
anticlockwise
until
you hear it “click”. The fan heater now switches off. The
power control lamp (1) goes off.
5.
Now turn the rotary thermostat switch (6) slightly in a
clockwise
direction. The fan heater will now automatically
switch the heating on and off to maintain the desired room
temperature. The power control lamp (1) switches on and
off correspondingly.
6.
The further you turn the rotary thermostat switch in a
clockwise
direction, the hotter the room temperature will
get. The highest position equals a room temperature of
approx. 30 °C. The lowest position ( ) (3) equals a room
temperature of approx. 5 to 8 °C.
7.
It is normal for the thermostat
not
to switch on when
the room temperature
is higher than 30 °C.
8.
If the room temperature is lower than 5° - 8°C, the fan
heater will continue heating until the room temperature
has risen to more than 5° - 8 °C.
9.
When the rotary thermostat switch (2) is in the highest
position (4), you can
not
turn it any further in a
clockwise
direction, only
anticlockwise.
10.
Before handling, moving or cleaning the fan heater,
turn the rotary thermostat switch (2) to its lowest position
(3), disconnect the power plug from the power socket and
allow the fan heater to cool for at least 20 minutes.*
BH-999E – Rotary thermostat switch and 60 Minute Timer
Thermostat only
1.
If you only wish to use the fan heater with the rotary
thermostat switch (2), please follow the instructions under
BH-888E – Rotary thermostat switch. The fan heater ope-
rates with an output of 1200 W.
Thermostat and Timer
1.
Turn the rotary thermostat switch (2) to the desired
room temperature. For this, please observe the instruc-
tions under BH-888E: rotary thermostat switch.
2.
Set the 60 minute timer to the desired period of use. For
the set time period the fan heater operates with an output
of 2000 W and heats the room really fast.
3.
As soon as the set time has run out, the fan heater con-
tinues to operate with an output of 1200 W and maintains
the room temperature selected via the rotary thermostat
switch (2).
4.
Before handling, moving or cleaning the fan heater, turn
the rotary thermostat switch (2) to its lowest position ( )
(3) and disconnect the power plug from the power socket.
Overheating protection
1.
The fan heater is equipped with overheating protection
which switches the fan heater off
automatically
if it over-
heats. When the overheating protection is activated, the
appliance does not operate even though the power control
lamp lights up.*
2.
Turn the rotary thermostat switch (2) to its lowest posi-
tion ( ) (3) and disconnect the power plug from the
power socket.
