69-1679EF—1
6
❑
In heating, make sure the temperature setting is above the
room temperature and the flame
is present in the display.
❑
In cooling, make sure the temperature setting is below the
room temperature and a solid snowflake
is present in the
display (T8775C only).
NOTE:
If a call for cooling is made before the compressor has
been off for five minutes, or if a power interruption
occurs while the compressor is running, the thermostat
will go into a five-minute delay to protect the compres-
sor. The snowflake
will flash during this delay.
❑
Check the system fuse or circuit breaker and replace or reset if
necessary.
❑
Check for air movement at the register.
If you have questions concerning this thermostat, call Honeywell
Customer Care at 1-800-468-1502.
Summary of Contents for C
Page 7: ...7 69 1679EF 1 ...
