background image

2

WELCOME

PREPARATION

Before beginning the assembly of this product, ensure 

that all parts are present. Compare all parts with the 

package contents list and hardware contents list. If 

any part is missing or damaged, do not attempt to 

assemble the product.

After opening the top of the carton, remove the 

mounting hardware package from the foam inserts, 

then remove the motor from the packaging and 

place it on a soft surface, such as a carpet, to avoid 

damage to the finish.

Estimated Assembly Time:

 Under 60 minutes

Tools Required for Assembly (not included): Electrical 

Tape, Phillips Screwdriver, Pliers, Safety Glasses, 

Step Ladder, and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape 

Measure, Wiring Handbook, and Wire Cutters

CARE AND MAINTENANCE

At least twice each year, lower the canopy to check 

the downrod assembly, and then tighten all screws 

on the fan. Clean the motor housing with only a soft 

brush or lint-free cloth to avoid scratching the finish. 

Clean the blades with a lint-free cloth. You may 

occasionally apply a light coat of furniture polish to 

wood blades for added protection.

Important:

 Shut off the main power supply before you 

begin any maintenance tasks. Do not use water or a 

damp cloth to clean the ceiling fan.

FAN WEIGHT

The net weight of this fan is: 17.6 lbs. (8,0 kg).

TABLE OF CONTENTS

ATTACH YOUR RECEIPT HERE

Serial Number
Purchase Date

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . .2
Package Contents  . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Mounting Bracket Installation . . . . . . . . . . . . . . . . . . .6
Standard or Angle Mounting Instructions . . . . . . . . . .7
Closemount Instructions. . . . . . . . . . . . . . . . . . . . . .10
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Canopy Installation. . . . . . . . . . . . . . . . . . . . . . . . . .12
Blade Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Light Kit Installation  . . . . . . . . . . . . . . . . . . . . . . . . .14
Operating Instructions  . . . . . . . . . . . . . . . . . . . . . . .16
Replacement Parts List  . . . . . . . . . . . . . . . . . . . . . .18
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Limited Lifetime Warranty. . . . . . . . . . . . . . . . . . . . .20

Summary of Contents for CARMEL 50196





















Reviews: