Mechanical Installation - Mounting
CIU 888
Part No.: 4417590_Rev13
2 - 6
Installation Manual
$*6
3. Once all the four screws are in place, secure them tightly using a
torque of 4.6 Nm (40.7 in lbs) when using a low carbon steel M6
screw.
FIGURE 2-5
CIU 888 assembled in a 19" Rack
2.5.3 Wall Mounting
You will need a wall mounting kit for wall mounting CIU 888. f you have
not ordered it from the factory, order it as an accessory. See the
accessory list provided in this manual.
The wall mounting kit consists of the following parts:
Wall Mount Base Plate
Wall Mount Clamps
For accessibility of the front panel and recommendations for cooling
with the heat pipe, follow these recommendations:
The height of the front panel must be suitable enough for you to have
clear visibility and free access of the front panel.
Mount the base plate horizontally so that it ensures that the CIU 888 is
also mounted horizontally.
Follow these steps to mount the unit to the Wall Mount Base Plate:
1. Hold the Wall Mount Base Plate against the wall and make a marking
for the holes. Drill holes and fix the screws in place.
CAUTION! Ensure that the bracket is perpendicular to the floor
and does not tilt sideways.
