FUNCTION BUTTONS
USE & OPERATION
COOL
To begin cooling the desired area press the ''COOL’'
button. The indicator light will come on and the water
pump will operate. You can feel the cooler air after the
Honeycomb media is completely wet.
COOL
POWER
Press the 'POWER' button to turn the unit on. To turn the unit
off, press the button again. The cooler will start automatically at
medium speed. After a few seconds the speed will switch to low.
POWER
SPEED
Press the 'SPEED' button repeatedly and the speed will
change. The indicator light will show the selected speed.
3 = High
2 = Medium
1 = Low
SPEED
9