background image

WARNING—READ AND SAVE THE AIR COOLER GUIDE AND USER MANUAL 

The Air Cooler Guide and User Manual are intended to provide important information needed to set up, 
operate, maintain and troubleshoot your Air Cooler. Failure to follow these instructions may damage 
and/or impair its operation, create hazards, and void the warranty.

READ AND SAVE THESE INSTRUCTIONS:

When using electrical appliances, basic safety precautions should always be followed:







Check the household voltage to ensure it matches the appliance’s rating specifications.
Before operating the product, remove the packaging and check that product is in good condition.
DO NOT operate with a damaged cord or plug. If the supply cord is damaged, it must be replaced 
with a supply cord which is as per manufacturers specifications, by the authorized service centre or 
its service agent or a similarly qualified person in order to avoid a hazard.
DO NOT use an extension cord with this unit.
DO NOT run power cord under carpeting, or cover it with rugs or runners. Keep the cord away from 
areas where it may be tripped over.
Always ensure the water tank is filled with water above the "min." level mark, when operating the air 
cooler in evaporative COOLING mode.
Always unplug the Air Cooler before refilling the water tank, cleaning, servicing or relocating the unit.
Never pull the cord. Remove it from the electrical outlet/ socket by grasping and pulling on the 
plug-end of the cord.
This appliance has been manufactured for use in domestic environments and must not be used for 
other purposes.
DO NOT use in areas where gasoline, paint or other flammable goods and objects are stored.
When using the COOL setting, make sure the water tank is at Max Indicator Level. Operating the unit 
on the COOL setting with an empty tank may result in damage to the water pump.
DO NOT attempt to repair or adjust any electrical or mechanical functions of the Air Cooler, as this 
may void the warranty.
DO NOT cover the cooler’s air inlet or outlet, as this may damage the motor.
DO NOT insert or allow objects to enter any ventilation or exhaust opening, as this may damage the 
unit and may cause electrical shock or fire.
DO NOT operate with the Honeycomb Cooling Media removed, as this will overload and damage the 
motor.

SAFETY RULES 

IMPORTANT: 

The evaporative air cooler is not an air conditioner as it does not use a compressor or 

refrigerant gas. It should not be expected to cool as efficiently as a refrigerated air conditioner.

Outdoors (for outdoor models only)

IMPORTANT: 

Honeywell Outdoor Air Cooler models are designed to IPX4 product standards and not 

recommended to be placed outdoors during heavy rain or snow.

2

COOLER LOCATION (CONTINUED) 

Use only on GFCI Protected outlets/ sockets (for USA only).
Power cords must be secured to avoid tripping.
The wiring and connections must be protected from water. The electrical plug and Air Cooler 
connections must be dry at all times.
Set the unit on a solid flat surface.

EN

Summary of Contents for CL15AE











Reviews: