2
PRODUCT IDENTIFICATION SYSTEM
C
-Electrical Motor
N
-Fail Safe Function (Non-Spring Return)
61
-24V Floating C ON/OFF
75
-24V Modulating C Fl ON/OFF
46
-230V ON/OFF
05
-44 lb-in. (5 Nm)
10
-88 lb-in. (10 Nm)
A
-Standard Model
1
-No Feedback
2
-Voltage Feedback Signal
0
-No Internal Auxiliary Switches
2
-Two Internal Auxiliary Switches
XX
-System Controlled Numbers
C
N
75
10
A
2
0 XX
BASIC FEATURES
Fig. 1. Setting units and control elements
Legend for Fig. 1:
1) Universal shaft adapter
2) Mechanical end limits (manually adjustable)
3) Declutch button
4) Function selection switch
5) Removable access cover
6) Anti-rotation bracket
Contents of Package
The delivery package includes the actuator, parts 1 through 6
(see Fig. 1), plus two cable grommets and a spare cable
grommet.
RUN MODES
The function selection switch (see Fig. 2) can be used to place
the actuator into any one of two different modes:
•
Service/Off; or
•
the floating/2-position run mode (“Dir” for CCW-closing
dampers or “Rev” for CW-closing dampers).
Fig. 2. Function selection switch
Power-Off Behavior
If power is removed, the shaft adapter remains in position.
Service/Off
If the function selection switch is set to the “Service/Off”
position, then all rotary movement is cancelled, and all
control signals are ignored, thus allowing the actuator to be
manually operated safely.
Model Description
CN6105A1011
5Nm, 24Vac/Vdc, floating control, non-spring
return, no feedback and without aux. Switch
CN4605A1001
5Nm, 230Vac, floating control, non-spring
return, no feedback and without aux. Switch
CN6110A1003
10Nm, 24Vac/Vdc, floating control, non-spring
return, no feedback and without aux. Switch
CN6110A1201
10Nm, 24Vac/Vdc, floating control, non-spring
return, no feedback and with aux. Switch
CN4610A1001
10Nm, 230Vac, floating control, non-spring
return, no feedback and without aux. Switch
CN05,CN10 SERIES DAMPER ACTUATORS FOR FLOATING/2-POSITON CONTROL
CN0B-0544CH33 R0805B
