background image

CHAPTER

4

75 Series Mobile Computer User Guide

51

USE THE CAMERA

Learn to use the color camera to take pictures and record videos, read bar codes, 
perform document capture, or perform signature capture. 

About the Color Camera

The camera lens and flash are located on the back of the computer. You run the 
Pictures & Videos application to access the camera features. 

The camera and flash are located on the back of the computer. You can use the 
camera for several tasks, including:

Taking pictures and videos

Reading bar codes

Signature capture

Document  imaging.

How to Take Pictures and Record Videos

You use the Pictures & Videos application to use the camera for taking pictures or 
recording videos, and to configure the camera settings for still pictures and video.

Note:

While the Pictures & Videos camera application is running, you cannot use either the 
imager or the camera to read bar codes. If Windows Media Player is running when you 
start the Pictures & Videos camera application, Windows Media Player is 
automatically closed.

In the Pictures & Videos application, you can:

take, view, and edit pictures.

switch between Still (camera) mode and Video mode.

record and launch video clips stored on the computer or a microSD card.

configure camera settings for taking pictures and videos.

Summary of Contents for CN75

































































































































































































































































Reviews: