75 Series Mobile Computer User Guide
53
4. Tap
Menu
>
Options
.
5. From the “Save file to” list, select
SD card
and tap
OK
.
Configure or Create Camera Scenes
Camera scenes are sets of preset values for camera settings. You can select or
create a scene to accommodate your specific needs.
1. Tap
Start
>
SceneEditor
.
2. Select a Scene to configure and then tap
.
•
Or, to create a new scene, tap
New
.
3. Configure the necessary settings.
•
If you are creating a new scene, type a name in the Scene box.
4. Tap
Save
.
5. When you are prompted to save the settings, tap
Yes
.
•
The changes you made are saved.
6. Tap
OK
to close the message box.
Scene Settings
When you use SceneEditor to create a scene for the camera, you can configure the
these settings.
Setting
Description
Choices
Exposure Metering
Specifies the area of
the image the camera
uses to determine
optimal exposure.
•
Whole screen avg: Uses the image as a
whole.
•
Center weighted avg: Uses the entire image
but places emphasis on the center quarter
of the image.
•
Center 1/4 averaged (default): Uses the
center quarter of the image.
•
Lower 1/4 averaged: Uses the lower quarter
of the image.
•
Upper 1/4 averaged: Uses the upper quarter
of the image.
•
Lower 1/2 averaged: Uses the lower half of
the image.
•
Upper 1/2 averaged: Uses the upper half of
the image.
Exposure
Compensation
Exposure level of the
image.
Values are from -2.5 (darker, underexposed) to
+2.5 (lighter, overexposed) in increments of 0.5.
Default is 0.
Summary of Contents for CN75
