W-NXS AND CP-NXS
74-4059—01
6
Mounting
Notes
•
This product is intended for indoor use only. The unit should not be exposed to ambient conditions outside
of the range of:
–
Humidity: 5 to 80% at 25ºC (77ºF), non-condensing
–
Temperature: 0ºC (32ºF) to 50ºC (122ºF) if CompactFlash (base) model, or
5ºC (41ºF) to 40ºC (104ºF) if hard drive option.
•
Mechanical ambient conditions are as follows:
–
Vibration, in operation:
•
Flash-based model: 10 to 58 Hz: 0.075 mm, 58 to 500 Hz: 9.8 m/s
2
;
•
with hard drive option and DIN mounting:
none permitted
;
•
with hard drive option and wall mounting: 10 to 58 Hz: 0.035mm; 58 to 200 Hz: 4.9 m/s
2
–
Resistance to shock, in operation:
•
Flash-based model: 150 m/s
2
, 11 ms;
•
with hard drive option: 50 m/s
2
, 30 ms
•
A minimum clearance of 3.94" (100mm) is required around all four sides of the NXS, between any
other devices and/or sides of the enclosure. See
Mounting orientation is strongly recommended to be
horizontal only
, with connectors at bottom,
to maximize heat dissipation.
The following sections provide more details:
•
•
•
•
USB Strain-Relief
A strain-relief bracket is included in the NXS hardware bag, for use with USB cables. Once mounted to the unit, you
can secure USB cables to the bracket using cable tie-wraps (not supplied). Securing cables to the bracket helps
prevent accidental detachment from the USB ports.
Use one of the provided pan-head screws (Torx T20 head) to mount the bracket below the ports. See
.
Figure 3
USB cable strain-relief bracket.
USB Cable
Strain-Relief
Bracket
USB Ports
Bracket
Mounting
Screw (T20)
