W-NXS AND CP-NXS
7
74-4059—01
Space Requirements
A typical installation includes the power supply module, and NXS-UPS (UPS module and battery module). Depending
on the enclosure space available, mount the NXS and other modules on either a single DIN rail, as shown in
,
or on two DIN rails, as shown in
(preferred) or in
Figure 4
Single DIN-rail mounting of all devices.
Figure 5
Two DIN-rail mounting method A (preferred), NXS and Battery located below other modules.
NXS
Power Supply
SITOP UPS
Battery
Width minimum 27.6" (701 mm): 501 mm total device width, plus 100 mm each side of NXS
Height minimum 13.1" (333 mm): 133 mm device height, plus 100 mm above and below NXS
3.94" (100 mm)
minimum, or
more if possible
3.94"
(100 mm)
min.
3.94" (100mm)
min.
3.86"
(98 mm)
3.54"
(90 mm)
2.0"
(51 mm)
3.94"
(100 mm)
min.
5.24"
(133 mm)
10.35" (263 mm)
NXS
Power Supply
SITOP UPS
Battery
Width minimum 22.1" (561 mm):
NXS and Battery modules
Height minimum 20.0" (508 mm)
all devices both DIN rails
100 mm clearance all sides of NXS, 50 mm clearance top of
UPS
1.97" (50 mm)
min.
3.86"
(98 mm)
3.94"
(100 mm)
min.
3.94"
(100 mm)
min.
5.24"
(133 mm)
4.92"
(125 mm)
3.94"
(100 mm)
min.
10.35" (263 mm)
3.94" (100 mm)
minimum, or
more if possible
