WEB-600E AND CP-600E NETWORK CONTROLLERS
62-0433—01
6
WARNING
Power to the controller must be OFF when
installing or removing option cards, or damage will
occur! Also, you must be very careful to plug an
option card into its connector properly (pins
aligned).
Option cards typically provide additional communications
features, with the following available models (with others still in
development) listed in Table 2.
Table 1. WEB-600E Controller Option Card.
Option
Description
Notes
NPB-2X-485
Dual, optically-isolated, RS-
485 adapter with two 3-
position removable screw-
terminal connector plugs.
If installed in Option slot 1, ports operate as COM3 and COM4. If two 485 option
cards, ports are COM3, COM4 for Option slot 1, and COM5, COM6 for Option
slot 2.
NPB-LON
FTT-10A LON (LonWorks)
adapter
with a 2-position removable
screw-terminal connector
plug.
Port operates as LON1 if only one LON option, or LON2 in slot 2 if two LON
cards.
NPB-RS232
Single port RS-232 adapter,
with a DB-9M connector.
Supports baud rates up to
115200.
If installed in option slot 1, port operates as COM3. If two 232 option cards, ports
are COM3 for Option slot 1 and COM4 for Option slot 2.
NPB-GPRS-
W
NPB-GPRS
GSM cellular modem card
using GPRS (General Packet
Radio Service), with onboard
socket for SIM card, and a
Wyless SIM.
Includes SMA coax tilt-and-swivel antenna. The NPB-GPRS-W model is bundled
with a Wyless-provisioned SIM card. The NPB-GPRS model does not include a
SIM card.
NPB-ZWAVE
-US
or
-EU
Z-Wave wireless serial
gateway between the
controller’s WEBs-AX station
and an RF wireless Z-Wave
domain. Includes RP-SMA
coax tilt-and-swivel antenna.
-US model is 908.42 MHz for U.S. usage
-EU model is 868.42 MHz for European usage. If installed in option slot 1, card
operates as COM3.
