USE & OPERATION
REMOTE CONTROL
Power:
On / Off
Speed:
Low / Medium / High
Cool:
Controls cooling
Swing:
Controls the motion of the louvers
Timer:
Controls timer function for automatic shut off
12
NOTE
•
•
•
•
•
•
•
•
•
•
The remote control for your air cooler already has its battery installed.
The remote control requires a CR2032(1 x 3V) coin type or equivalent battery for
replacement.
Open the battery compartment at the back of the remote control and insert ta CR2032(1 x 3V)
coin type or equivalent battery. Care must be taken to insert the batteries according to the correct
polarity (+ / –) markings shown inside the battery compartment.
Always point the remote control signal transmitter towards the unit when operating.
Make sure that the signal path is not obstructed.
Remove the batteries if the unit is not going to be used for an extended period of time.
Do not drop the remote control.
Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.
Do not mix old and new batteries.
Exhausted batteries are to be removed from the product.
