15
69-1284—2
❑
Press
or
until the desired wake temperature displays.
The setpoint temperature range is 40°F to 90°F (4.5°C to 32°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling.
❑
Press
to switch between setpoints.
NOTE:
Program times are the same for heating and cooling.
❑
Press
or
until the display shows the desired temperature setpoint.
❑
Press
until the fan is at the desired setting (On or Auto).
NOTE:
Setting Fan to On runs the system fan continuously in the program periods.
❑
Press
,
or
and repeat these steps for each time period. Your weekday is now programmed.
Program Saturday and Sunday
❑
Repeat each step in Program Weekdays for Saturday and Sunday.
❑
Press
when the entire week is programmed.
Clear a Program Period
NOTE:
Wake cannot be cleared.
❑
Press
,
, or
for the program period you want to clear.
❑
Press
until the desired day displays (Mon-Fri Sat; Sun).
❑
Press and hold the
,
, or
for approximately 3 seconds until the time and temperature clear.
❑
Repeat the above steps for each period to be cleared.
❑
Press .
Heat/Cool
Settings
Fan
Leave
Return
Sleep
Run
Program
Leave
Return
Sleep
Day
Leave
Return
Sleep
Run
Program
