STRYKER CVAHU ZIO CONFIGURATION GUIDE
53
Schedule
The Schedule option lets you modify the schedule
and change CVAHU Stryker's time.
The desired scheduling option (8 day, 7 days, etc.) is
setup in the Configuration Wizard (refer 63-2719: LCD
Wall Module Wall Operating Guide). The option
screens vary based on that selection.
Following example illustrates the steps for
viewing/editing a schedule for Monday. You can
similarly view/edit schedule for Saturday and any
other holiday
Step 1:
To access schedule parameter group refer
section
Figure 97: Parameter Schedule
Step 2:
Use the
EDIT
soft key to move to the next
screen (e. g. Monday).
Figure 98: Parameter Schedule Monday
Step 3:
Use the
EDIT
soft key to move to the next
screen (e. g. MON E1).
Figure 99: Parameter Schedule Monday Mon E1
Click the
EDIT
soft key to change the time and
occupancy state for this event.
1. Use the up/down arrows to change the time.
2. When editing an event, use the
NEXT
soft key to
toggle between editing the time and changing the
occupancy state (i.e. OCC/UNOCC/STANDBY).
3. Use the up/down arrows to change occupancy
state.
4. Click
DONE
soft key to apply changed time and
occupancy state settings.
5. Click
CANCEL
soft key to exit the
MON E1
screen display without saving any changes.
6. Click
NEXT
and
follow above mentioned steps 1
to step 6, to view or edit next three events i. e.
MON E2, MON E3, and MON E4.
To remove a programmed event, use the up/down
arrow keys to scroll the time to either 12:00 p.m. or
12:00 a.m. Just before reaching 12:00 the time
changes to four dashes (- - - -). Click the
DONE
soft
key at this point to remove a programmed event.
In the 5-2 or 5-2-1 schedule options:
“5” means Monday to Friday and Monday's
events are shown on the Zio.
“2” means Saturday and Sunday and Saturday's
events are shown on the Zio.
“1” means holiday.
When Monday is changed, the TR75 copies that
event to Tuesday and so on till Friday. It updates this
schedule into the controller for Monday through
Friday. The same occurs for Saturday and Sunday
when a change is made on Saturday. When a holiday
is modified it is also updated into the controller.
