D6 PRO Wi-Fi DUCTLESS CONTROLLER
Quick Guide
Warmer
Cooler
Display sleep
The controller goes into Display sleep (the screen is dim) after 45 seconds of
inactivity. Press
o
to wake up the controller. This button push does not change
temperature or settings.
Room temperature
Any time the controller is not being interacted with, the current room temperature
is displayed on screen.
Viewing set temperature
Be sure the controller is not in Display sleep, then press
+
or
-
once to view the
current set temperature. The set temperature will “pulse” on screen. After a short
period of time the screen will change to display the room temperature.
Change temperature
1. Be sure the controller is not in Display sleep, then press
+
or
-
more than once
to change the set temperature so it is higher or lower in the current mode.
2. Stop pressing
+
or
-
when you reach the temperature you want.
3. The screen will pulse and then return to the room temperature display.
