![background image](http://html.mh-extra.com/html/honeywell/dcp550/dcp550_user-manual_152001056.webp)
Chapter 5. FUNCTIONS
• When there is a G.SOAK wait at the start of a segment and the ON Time is set to 0,
the output goes on at start of the G.SOAK wait and the On Time starts as the
G.SOAK wait ends.
The output time = G.SOAK time + (Off Time – On Time) (see segment 8.)
• An On Time and Off Time occurring at the end of a RAMP-X segment are valid when
there is a G.SOAK wait at the end of a segment or as the end state of the final segment.
(See segment 10 in the figure.)
Note, however, that an On Time or Off Time setting at the end of a RAMP-T segment
is either valid or invalid depending on the computational error.
9
10
Segment
Segment
8
Segment
5-7