13 - 5
Connecting Power to the eBase
1.
Plug the A/C power cord into the power
adapter.
2.
Plug the power cable into the power connector
on the back of the eBase.
3.
Plug the A/C power cord into a grounded power
source. The Power/Dock LED on the eBase
illuminates solid red to indicate the eBase has
power and no terminal is docked.
Charging the Main Battery
The base provides power to the Dolphin terminal and allows the charg-
ing of the terminal’s main battery. The intelligent battery charging sys-
tem incorporated into all Dolphin terminals prevents overcharging,
which means that Dolphin terminals may be stored in the base indefi-
nitely without damage to the terminals, battery packs, or the base.
The
base completes a full charge of the main battery pack installed in the
terminal seated in the terminal well in 4 hours for the standard battery
or 6 hours for the extended battery.
For more information about Honeywell battery packs and how to check
battery power levels in your terminal, refer to
To Power a Terminal and Charge its Main Battery
1.
Install the battery pack in the terminal; see
2.
Verify the base has power. If the Power/Dock LED is not
illuminated, see
3.
Slide the terminal into the terminal well. The Power/Dock LED
changes to green. Battery charging begins immediately if required
by the Dolphin terminal.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
Charging a Spare Battery in the Auxiliary Battery Well
The auxiliary battery well located on the back of the base charges a spare battery independently of the
terminal well. The Aux Battery LED on the front panel indicates the status of the battery in this well.
Charge time is 4 hours for the standard battery pack or 6 hours for the extended battery pack; see
Power Cable
A/C Power Cord
Power Adapter
!
!
Summary of Contents for Dolphin 7800
