background image

14 - 1

14

Dolphin 7800 Mobile Base Device (Model 7800-MB)

Overview

The Dolphin Mobile Base charging cradle is designed specifically for in-premise and in-transit data col-
lection applications. The base features a mounting bracket and a cigarette lighter adapter to adapt it to 
your environment.

The 7800-MB charger is designed for use with Dolphin 7800 model terminals using standard battery 
pack model 7800-BTSC or 7800-BTCW (Li-ion 3.7 V, 8.9 watt hour) or extended battery pack model 
7800-BTXC or 7800-BTXCW (Li-ion 3.7 V, 14.8 watt hour) manufactured for Honeywell International Inc.

Warning! 

The Mobile Base is not designed for use in hazardous locations.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell 
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Charging Overview

The base provides power to the intelligent battery charging system in all terminals that senses when a 
full charge has been achieved and switches to a trickle charge to maintain the full charge. The base 
completes a full charge of the main battery pack in 4 hours for the standard battery pack or 6 hours for 
the extended battery pack.

Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the 

Guidelines for 

Battery Pack Use and Disposal

 on page 3-13.

We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in 
damage not covered by the warranty. 

Convenient Storage

Intelligent battery charging makes the base a safe and convenient storage receptacle for your Dolphin 
terminal.

!

!

!

Summary of Contents for Dolphin 7800



















































































































































































Reviews: