background image

E-MON INTERVAL DATA RECORDER

27

62-0394—06

Appendix K - Meter Limited Warranty 

Subject to the exclusions listed below, Honeywell E-Mon will either repair or replace (at its option) any product 
that it manufactures and which contains a defect in material or workmanship. 

The following exclusions apply: 

1.

This Limited Warranty is only effective for a period of (5) five years following the date of manufacture when 
installed in accordance with manufacturer’s instructions by qualified personnel.

2.

Honeywell E-Mon must be notified of the defect within ninety (90) days after the defect becomes apparent 
or known. 

3.

Buyer’s remedies shall be limited to repair or replacement of the product or component which failed to 
conform to Honeywell E-Mon’s express warranty set forth above. 

4.

Buyer shall be responsible for all freight costs and shall bear all risk of loss or damage to returned goods 
while in transit. 

5.

This Limited Warranty does not cover installation, removal, reinstallation, or labor costs, and excludes nor-
mal wear and tear. Buyer shall provide labor for the removal of the defective component or item and instal-
lation of its replacement at no charge to Honeywell E-Mon. 

6.

This Limited Warranty does not cover any product if: (i) a product is altered or modified from its original 
manufactured condition, (ii) any repairs, alterations or other work has been performed by Buyer or others 
on such item, other than work performed with Honeywell E-Mon’s authorization and according to its 
approved procedures; (iii) the alleged defect is a result of abuse, misuse, improper maintenance, improper 
installation, accident or the negligence of any party; (iv) damaged as a result of events beyond Honeywell 
E-Mon’s control or other force majeure events or (v) used in conjunction with equipment, components, 
accessories, parts or materials not supplied or approved by Honeywell E-Mon. 

7.

This Limited Warranty is limited to the obligation to repair or replace the manufactured product. THIS IS 
THE SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. IN NO EVENT SHALL HONEY-
WELL E-MON BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE 
DAMAGES (INCLUDING ANY DAMAGE FOR LOST PROFITS) ARISING OUT OF OR IN CONNECTION WITH 
THE FURNISHING OF PRODUCTS, PARTS OR SERVICES, OR THE PERFORMANCE, USE OF, OR INABILITY 
TO USE ANY PRODUCTS, PARTS OR SERVICES, SALE OF OR OTHERWISE, WHETHER BASED IN CON-
TRACT, WARRANTY, TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, OR ANY OTHER LEGAL OR 
EQUITABLE THEORY. 

8.

EXCEPT AS EXPRESSLY PROVIDED HEREIN, HONEYWELL E-MON MAKES NO WARRANTY OF ANY KIND, 
EXPRESS OR IMPLIED WITH RESPECT TO ANY PRODUCTS, PARTS OR SERVICES PROVIDED BY HONEY-
WELL E-MON INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS OR COMPONENTS DISTRIBUTED, BUT NOT 
MANUFACTURED, BY HONEYWELL E-MON ARE NOT WARRANTED BY HONEYWELL E-MON AND 
BUYER MUST INSTEAD RELY ON THE REPRESENTATIONS AND WARRANTIES, IF ANY, PROVIDED 
DIRECTLY TO THE BUYER BY THE MANUFACTURER OF SUCH PRODUCT OR COMPONENT.

Summary of Contents for E-Mon IDR Series





























Reviews: