Mark V and Mark VII EGPWS Pilot’s Guide
Smart Runway
®
060-4241-000
94
Rev H, August 2011
SECTION 6
Operational
Availability
RAAS is operationally available anytime the EGPWS is
powered and the following conditions are met:
•
The software for the RAAS functions have been loaded and
enabled into an EGPWS (with a minimum of software
version -218-218 (or later) and Terrain Database 435). For
RAAS with software version -230-230 (or later) Terrain
Database 454 (or later) is required;
•
The aircraft is on or approaching an airport in the RAAS
runway database; and
•
RAAS is functional ( e.g., all external signals are available
and not faulted, GPS position accuracy meets minimum
RAAS requirements, there are no internal EGPWS faults).
RAAS operational availability is integrated into the existing
EGPWS fault monitoring and self-test functions. Consistent
with approved EGPWS self-test design, the loss of RAAS
functions is indicated on-ground only during an EGPWS self-
test. There is no automatic annunciation of the loss of RAAS
functionality on most aircraft. The audio self-test messages
are as follows.
RAAS Self-Test Audio Messages
:
Audio Message
Conditions
“Runway Awareness
OK Feet”
RAAS software enabled, functioning, has good position
information, and is at a validated airport. Feet will be
annunciated in the gender voice option (male or female)
selected for RAAS.
“Runway Awareness
OK Metres”
RAAS software enabled, functioning, has good position
information, and is at a validated airport. Metres will be
annunciated in the gender voice option (male or female)
selected for RAAS.
“Runway Awareness
Not Available”
RAAS software enabled, but the system either has no
position information, the accuracy of the position
information is insufficient to allow RAAS to function, or
the aircraft is at an airport that has not been validated
for RAAS in the EGPWS Terrain Database.
“Runway Awareness
Inhibited”
RAAS software enabled, but the advisories have been
inhibited with the activation of an external discrete.
“Runway Awareness
R-T-O”
RAAS software enabled and functioning, but RAAS has
detected a Rejected Take-Off condition. To clear this
message, the aircraft must be taxied off the runway
area.
“Runway Awareness
INOP”
RAAS software enabled but function is inoperative.
Summary of Contents for EGPWS MK V
