Calibration
Part No.: 44200004 - Revision 2
SVP Controller Operation Manual
4-11
Volumetric Water Draw Data Sheet
Date:
Prover Serial Number:
Prover Model Number:
Report Number:
Location:
Base Temperature (Tb):
Base Measure Volume-from calibration cert. (BMV):
Volume Measure Thermal Coefficient (Gc):
Compressibility Factor (water) (CPL):
Flow Tube Area Thermal Expansion Coefficient (Ga):
Detector Linear Thermal Expansion Coefficient (Gl):
Modulus of Elasticity of flow tube (E):
Flow Tube Inside Diameter (inches) (ID):
Flow Tube Wall Thickness (inches) (WT):
Fill 1
Fill 2
Fill 3
Fill 4
Fill 5
Fill Time (minutes) =
Flow Rate (Nominal Volume/Fill Time) =
Temperature Prover (
Tp
) =
Temperature Detector (
Td
) =
Prover Pressure (
Pp
) =
Scale Reading on Volume Measure (
SR
) =
Volume of Water adjusted for SR (
BMVa
) =
Test Measure Temperature (
Ttm
) =
Correction for Temp. Differential (
Ctdw
) =
Effect of Temp. on Test Measure (
CTStm
) =
Effect of Temperature on Prover (
CTSp
) =
Combined effect of CTSM & CTSP (
CCTs
) =
Volume Waterdraw (
WD
) =
Effect of Pressure on Flow Tube (
CPSp
) =
Compressibility of water in prover (
CPLp
) =
Corrected Water Drawn Volume (
WDzb
) =
Table 1:
Volumetric Water Draw Data Sheet
