background image

© 2000 Honeywell.  All Rights Reserved. 

P/N 035-00438-000

AC7032.00

5 Year Limited Warranty

Honeywell HEPA Air Cleaners
Model No. 17005

This product has been engineered and
crafted with great care for your
satisfaction. Be sure to fill out and return
the enclosed card within 10 days of
purchase.

A.

This limited warranty applies to repair

or replacement of product found to be
defective in material or workmanship
within 5 years of the date of purchase.
This warranty does not apply to damage
resulting from commercial, abusive,
unreasonable use or supplemental
damage. Defects that are the result of
normal wear and tear will not be
considered manufacturing defects under
this warranty. HONEYWELL IS NOT
LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE. ANY IMPLIED WARRANTY,
INCLUDING MERCHANTABILITY OR
FITNESS FOR A PARTICULAR
PURPOSE, ON THIS PRODUCT IS
LIMITED IN DURATION TO THE
DURATION OF THIS LIMITED
WARRANTY. Some regions do not allow
the exclusion or limitation of incidental or
consequential damages or limitations on
how long an implied warranty lasts, so
the above limitations or exclusions may
not apply to you. This warranty gives you
specific legal rights, and you also may
have other rights which vary from region
to region. 

This warranty applies only to

the original Purchaser of this product.

B.

At its option, Honeywell will repair or

replace this product if it is found to be
defective in material or workmanship
within the limited warranty period.
Defective product should be returned to
the place of purchase in accordance
with store policy or to Honeywell.

C.

This warranty does not cover 

damage resulting from unauthorized

attempts to repair or from any use not
in accordance with this manual.

D. 

This warranty 

DOES NOT

cover 

the pre-filter or the HEPA filter except
for material or workmanship defects.

E. 

Return defective product to the 

following address with a brief
description of the problem. Include
proof-of-purchase and a U.S. $10.00/
Canadian $15.00 check or money
order for handling, return packing and
shipping charges. Please include your
name, address and daytime phone
number. You must prepay shipping
charges. Mark carton 

"Attention

Returns Department"
Ship to:  

In USA:

Honeywell
Returns Department
4755 Southpoint Drive
Memphis, TN 38118 U.S.A.

In Canada:

Honeywell
510 Bronte St. South
Milton, Ontario Canada L9T 2X6

If you experience a problem with your Air
Cleaner, please see owner’s guide for
instructions. Please do not attempt to
repair the air cleaner yourself. Doing so
may void the warranty and could cause
damage or personal injury. If 
the problem still persists, please call:

Honeywell
Consumer Relations Dept. 
service@honeywell.com
Toll Free 1-800-332-1110.

Mail Questions or Comments to:

Honeywell
Consumer Relations Dept. 
250 Turnpike Road
Southborough, MA 01772 
U.S.A. 

Visit our website at

www.honeywell.com/yourhome

035-00438 17005 OM eng/fr/sp  8/3/01  12:44 PM  Page 10

Summary of Contents for Enviracaire 17005

































Reviews: