EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A
55
07/11
To set the white balance for high light or low light:
1.
From the OSD main menu, press
5
to select
Camera Options
.
2.
Press
4
to select
White Balance
.
3.
Press
1
to set the High Light WB Mode, or press
2
to set the Low Light WB
Mode, to one of the following:
•
AUTO
(default): Auto White Balance mode automatically adjusts the
white balance using color information from the entire screen. It
compensates for color temperature changes from 3200 K to 7500 K.
Use this setting to control the white balance for a particular shooting
environment.
•
ATW
:
Auto Tracing White Balance mode automatically adjusts the
white balance every time a change is detected in lighting conditions. It
compensates for color temperature changes from 2000 K to 10000 K.
Use this setting to control the white balance when lighting conditions
are variable.
•
Indoor
: If the lighting condition is limited to fluorescent light, you can
select the preset 3200 K base mode for more precise white balance
adjustment.
•
Outdoor
: If the lighting condition is limited to daylight, you can select
the preset 5800 K base mode for more precise white balance
adjustment.
To set the video gain and shutter speed for high light or low light:
1.
From the OSD main menu, press
5
to select
Camera Options
.
2.
Press
4
to select
White Balance
.
3.
Press
3
to set
Enter High Lght
to one of the following
:
•
0 dB, 2 dB, 4 dB, 6 dB, 8 dB, 10 dB, 12 dB, 14 dB, 16 dB, 18 dB, 20 dB,
22 dB, 24 dB, 26 dB, or 28 dB
4.
Press
4
to set
Enter Low Lght
to one of the following:
•
NTSC cameras (high light default is
1/60 s; low light default is 1/30 s):
1/4 s, 1/8 s, 1/15 s, 1/30 s, or 1/60 s
•
PAL cameras (high light default is 1/50 s; low light default is 1/25 s):
1/3 s, 1/6 s, 1/12 s, 1/25 s, or 1/50 s
To enable/disable manual white balance:
1.
From the OSD main menu, press
5
to select
Camera Options
.
2.
Press
4
to select
White Balance
.
3.
Press
5
to set manual white balance to
ON
or
OFF
(default).
Summary of Contents for EQUIP Series
