68
Configuring HDXG Camera Settings
To set red gain:
1.
From the OSD main menu, press
5
to select
Camera Options
.
2.
Press
4
to select
White Balance
.
3.
Press
1
to set manual white balance to
ON
.
4.
Press
2
to select
Red Gain 0–511
.
5.
Type a value from
0
through
511
(default =
128
) and then press
ENTER
.
To set blue gain:
1.
From the OSD main menu, press
5
to select
Camera Options
.
2.
Press
4
to select
White Balance
.
3.
Press
1
to set manual white balance to
ON
.
4.
Press
3
to select
Blue Gain 0–511
.
5.
Type a value from
0
through
511
(default =
128
) and then press
ENTER
.
Setting E-Flip and Mirror Image
E-Flip turns the image upside down. Mirror Image reverses the image
horizontally.
To enable/disable E-Flip:
1.
From the OSD main menu, press
5
to select
Camera Options
.
2.
Press
5
to select
Video Options
.
3.
Press
2
to set E-Flip to
ON
or
OFF
(default).
To enable/disable Mirror Image:
1.
From the OSD main menu, press
5
to select
Camera Options
.
2.
Press
5
to select
Video Options
.
3.
Press
3
to set Mirror Image to
ON
or
OFF
(default).
Setting the Vertical Phase Edge
Vertical Phase Edge, or line lock, lets you synchronize all analog cameras
connected to the same power line. This prevents the picture on the screen from
rolling vertically when switching from one camera to another.
Summary of Contents for EQUIP Series
