background image

MLS Digital Luminaire Controllers 

MLSM2000A - Control Module

DHW/DHS - Mini Detector Head

for use with Analogue 1-10V and Fixed-Output 

Electronic High-frequency Ballasts

Installation and Commissioning

Instructions

Note: QuickSet Pro required for commissioning

Summary of Contents for Ex-Or MLSM2000A

Page 1: ...rollers MLSM2000A Control Module DHW DHS Mini Detector Head for use with Analogue 1 10V and Fixed Output Electronic High frequency Ballasts Installation and Commissioning Instructions Note QuickSet Pro required for commissioning ...

Page 2: ...ust be no direct illumination 4 In order to achieve satisfactory light level regulating operation a detector must observe a substantially greater proportion of artificial light from the luminaire s under its control than from neighbouring luminaires not under its control This is particularly important when planning the installed layout of linear luminaires that have an integral detector positioned...

Page 3: ...eived ambient light level with no contribution from the controlled lighting Note When setting the regulating light level as described in the previous section the Threshold is also set to the current measured level Commissioning Detectors are supplied factory pre set which ensures the lighting will switch on automatically as soon as power is applied Final commissioning of the detectors requires the...

Page 4: ...perative that the MLS bus is wired with the correct type of cable normally it should be 1 5mm unscreened twisted pair Please read ApplicationNoteAN4001 for more details 6 Due to the fact that the photocell is on the ceiling looking down it is not possible for measurementsmade with a lux meter on the working plane to remain constant when daylight illuminates the ceiling and the working plane to a d...

Reviews: