a.
Activities
, which will display the generic version of the display showing a com-
bination of batches and procedures
b.
Batches
, which will display the batch version of the display showing only batches
and using S88 batch terminology
c.
Procedures
, which will display the procedure version of the display showing only
procedures and using procedure-based terminology
Tip:
If you have chosen the
Activities
option from the Operator’s menu and
your summary display is showing a mix of batches and procedures, you
can use the
Type
column to filter to show only batches or procedures as
shown below.
Type filter column
Accessing a summary display from the Station menu
1. From the (missing or bad snippet) View menu, select one of the following options:
Station menu options for Activity, Batch, and Procedure Summaries
a.
Activity Summary
, which will display the generic version of the display showing a
combination of batches and procedures
b.
Batch Summary
, which will display the batch version of the display showing only
batches and using S88 batch terminology
c.
Procedure Summary
, which will display the procedure version of the display show-
ing only procedures and using procedure—related terminology
Tip:
If you have chosen the
Activities
option from the Station menu and your
summary display is showing a mix of batches and procedures, you can
use the
Type
column to filter to show only batches or procedures.
Creating a batch or procedure
Honeywell 2017
253