To change focus to
Press
De-selects the object and cancels any uncommitted change.
CLR ENTR
Note that the TAB arrow keys function as tab keys on a qwerty keyboard, and are not the
same as arrow keys on a qwerty keyboard.
Controlling points, issuing commands and entering data
To:
Press
Acknowledge an alarm or message.
You can acknowledge alarms on the Alarm Summary or on a faceplate that has
focus.
Depending on how your system is configured, you can use this key to
acknowledge a whole page of alarms or messages if no individual line is
selected. You may be prompted to confirm your action.
(Note that in the case of a confirmable message, you cannot confirm it by
pressing ACK twice. You must first press ACK and then MSG CONFM.)
ACK
Silence all audible alarms
SIL
Confirm a confirmable message
MSG
CONFM
Clear the selected message on the Message Summary. Depending on how your
system is configured, this button can also be used to clear the whole page of
messages if no individual message is selected on the Message Summary.
MSG CLEAR
Enable/disable the state of the selected point (the point toggles state each time
you press the key)
LOAD
Lower the value of the selected object by 1% (default setting)
1
LOWER
Lower the value of the selected object by 10% (default setting)
of the selected object by 1% (default setting)
FAST
LOWER
Raise the value of the selected object by 1% (default setting)
the selected object by 1% (default setting)
RAISE
Raise the value of the selected object by 10% (default setting)
the selected object by 1% (default setting)
FAST RAISE
1
If you press the raise or lower keys faster than the server can respond to, repeated key presses are
ignored.
Reference topics
Honeywell 2017
313