F118 IN-CEILING MEDIA AIR CLEANER
5
68-0209-2 Revised 11-07
Fig. 4. Mounting procedure.
Mount Air Cleaner Cabinet
WARNING
Fire or Electric Shock Hazard.
Can cause personal injury or equipment damage.
Do not connect the power source until after electronic
air cleaner is mounted.
1.
The cabinet has multiple slots. See Fig. 4. Insert the
support shoulders into the selected slots.
2.
Bend the two tabs on each support shoulder until the
tabs are flush with the cabinet.
3.
Thread wire through the support shoulders. Make sure
the wire is strong enough to support the total weight of
the air cleaner. Never rest the air cleaner on the T-bar
unless it has been reinforced to hold the weight.
4.
Twist the support wire a minimum of four times.
WARNING
Equipment Falling Hazard.
Can cause personal injury, structural weakening,
buckling, or damage to equipment.
Be sure platform is stable and can support combined
weight of installer and equipment.
Use assistant to help support equipment during instal-
lation.
DROP
CEILING
F118
BE SURE TO TWIST THE SUPPORT WIRE A MIINIMUM
OF FOUR TIMES TO PROPERLY BEAR WEIGHT.
THERE MUST BE 12 IN. (305 MM) BETWEEN DROP
CEILING AND STRUCTURAL CEILING.
SUPPORT SHOULDER
POSITIONS
REINFORCED
T-BAR
SUPPORT
SHOULDER
(1 OF 8)
BEND TABS TO
HOLD MOUNT
ON AIR CLEANER
PLACE WIRE SUPPORTS AS CLOSE AS POSSIBLE
TO F118 SUPPORT SHOULDER POSITIONS,
APPROXIMATELY 5 IN. (127 MM) FROM ENDS.
T-BAR/DROP CEILING SUPPORT SYSTEM
24 IN.
(610 MM)
24 IN.
(610 MM)
M16212A
SUSPENDED
CEILING
STRUCTURAL CEILING
1
1
1
1
2
1
2
24 IN.
(610 MM)
REMOVE
T-BAR TO CREATE
48 X 24 IN.
(1219 X 610 MM) SPACE.
SUPPORT SHOULDER
LOCATIONS (8)
