120
ES-200X Series Manual —
P/N LS10131-000FL-E:C 7/25/2018
Operating Instructions
Read Status
Figure 4.1 illustrates a graphic representation of the maintenance levels:
Pressing
2
while viewing Print Screen #2 allows the user to print the Communicator’s settings. Refer to
“Communicator” on page 81 for additional information on the display.
Pressing
3
while viewing Print Screen #2 exits the user from the print menu.
4.24.12 Time-Date
The operator can view the daylight savings time and the month and week when daylight savings time will
begin and end. Pressing
2
while viewing Read Status Screen #5 will display the following screens:
4.24.13 Battery Charger
Read Status Screen #6 indicates whether the onboard battery charger is enabled or disabled.
4.24.14 4XTM Supervision
Read Status Screen #6 indicates whether 4XTMF Supervision is enabled or disabled.
4.24.15 Remote Sync
Read Status Screen #6 indicates whether remote synchronization is enabled or disabled.
Figure 4.1 Diagram of Maintenance Levels
DIRTY
Acceptable
Range
Maintenance
Urgent
Maintenance
Alert
Low Chamber
Reading
LOW
VALUE
1=DETECTOR DATA
2=COMM SETTINGS
3=EXIT PRINTING
Print Screen #2
READ STATUS
1=FUTURE USE
2=PRINT
3=TIME/DATE
Read Status Screen #5
DAYLIGHT SAVINGS
ENABLED YES
START MONTH MAR
START WEEK WEEK-2
DAYLIGHT SAVINGS
END MONTH NOV
END WEEK WEEK-1
READ STATUS
CHARGER ENAB YES
4XTM SPV ENAB NO
REM SYNC ENAB YES
Read Status Screen #6
