TH5110D NON-PROGRAMMABLE THERMOSTAT
7
69-1712—1
INSTALLER SETUP
Configure Installer Setup
1.
Enter Installer Setup by pressing and holding the
Up and Fan buttons, at the same time, for
approximately five seconds, until the screen
changes. See Fig. 16.
Fig. 16. Enter Installer setup.
2.
Release the Up and Fan buttons when the
display on the thermostat matches the display
in Fig. 17.
Fig. 17. Configure Installer Setup.
3.
See Fig. 18 to review how the thermostat buttons
are used during Installer Setup. See Table 3 for the
Installer Setup Numbers and Settings.
Fig. 18. Review thermostat buttons used for Installer
Setup.
Replace Batt
Service Needed
Setting
Cool
Inside
Fan
Auto
Cool
System
M22079
Replace Batt
Service Needed
Done
Next
M22143
Replace Batt
Service Needed
Done
Next
M22144
SETTING
INSTALLER SETUP
NUMBER
NEXT BUTTON
ADVANCES TO NEXT
INSTALLER SETUP
NUMBER
DONE BUTTON
EXITS THE
INSTALLER SETUP
AND SAVES YOUR SETTINGS
UP BUTTON
CHANGES SETTING
DOWN BUTTON
CHANGES SETTING
