7
2-2-2. Configuring the Programme Keys
Please take note of the following when you configure
Programme Keys:
1. The Programme Keys I/II/III correspond to
the Function key buttons I/II/III on the Control
Panel, which means clicking the Programme
Key I in the software interface or pressing the
Function Key I on the Control Panel will
activate the same Programme.
2. To configure a Programme Key, you should
assign an existing Programme (or create a
new Programme and designate it) to
Programme Key I, II, or III.
3. If you have designated a Programme to a
specific Programme Key previously, you will
not be able to designate said Programme to
another Programme Key.
4. For information about configuring a new
Programme or maintaining an existing
Programme, refer to Setting – Programmes.
Follow the steps described below to reconfigure
Programme Keys:
1. Click [Home Page] in the Top Menu.
2. Click on the [Living1] icon or any other available
programme that may have been created as described
later in this manual:
3. The system will display a small function menu above
the icon and you can specify the location of the
programme key. In this example, [I] has been chosen
and this means Programme Key [I] has been redefined
to [Living1].
4. After you have reconfigured the Programme Key,
you will see [I] over [Living1].
5. Remember that after you have finished a
configuration, you must select the Sync function to
apply the new settings to the Control Panel in order for
the changes to take effect particular when trying to
execute any of the blue Programme keys on the home
page.
2-2-3. Executing a Programme Key
Click the following buttons directly in this window to
execute the corresponding Programme Key:
: Execute Programme Key 1
: Execute Programme Key 2
: Execute Programme Key 3
The system will display one message window to inform
the user whether the execution of the Programme is
