Master Programming Level
Programming
Pressing
1
while viewing Onboard DACT Screen #2 will cause the following screens to appear:
Ring Count
The ring count designates the number of rings allowed on the phone line prior to answering an incoming
call from a service terminal. The factory default is
0
which means the control panel will not answer an
incoming call. This entry may be programmed for
1
to
25
rings.
To change the Ring Count, press
1
while viewing the Service Terminal Screen #2. The following screen
will be displayed:
A flashing cursor will appear in the lower left corner of the display. Enter the two-digit ring count which can be a value
between 00 and 25. After the second digit is entered, the display will return to the Service Terminal screen.
Supervised Phone Line
The Supervised Phone Line feature allows the user to disable the supervision of Phone Line 2 by the DACT when using an alternate
means of secondary transmission path. The factory default setting is Phone Line 2 supervised.
Pressing
2
for
Superv Phone Line
while viewing Onboard DACT Screen 2 will cause the following screen
to be displayed:
Each press of the
1
key while viewing this screen will toggle the option between Supervise Phone Line 2
Yes
and
No
.
3.5.6 History
The History option allows an authorized user to view or erase events which have occurred in the control
panel. Pressing
3
while viewing Programming Screen #2 will display the History options as shown in the
following display:
View Events
Pressing
1
while viewing the History Screen will allow the user to select the events to be viewed as illus-
trated in the following:
While displaying the View Events screen, press
1
to view all events,
2
to view only alarms, or
3
to view other events. Use the up and
down arrow keys to scroll through all of the displayed events.
SERVICE TERMINAL
1=RING COUNT 0
Service Terminal Screen
SERVICE TERMINAL
1=RING COUNT
Service Terminal Screen #2
RING COUNT
RANGE 00-25 RINGS
Ring Count Screen
DACT
1=SERVICE TERMINAL
2=SUPERV PHONE LINE
Onboard DACT Screen #2
SUPERVISE PHONE LINE
1=PHONE LINE 2 YES
PROGRAMMING
1=SYSTEM SETUP
2=OPTION MODULES
3=HISTORY
Programming Screen #2
HISTORY
1=VIEW EVENTS
2=ERASE HISTORY
History Screen
HISTORY
1=VIEW EVENTS
2=ERASE HISTORY
History Screen
HISTORY
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
View Events Screen
GF505 & GF510 Manual —
P/N 53164:B5 6/12/2018
8
1
