Tools Required:
Wrenches:
(1)
3
⁄
8
in., (1)
7
⁄
16
in., and (1) 10mm
Mounting shown for damper in
vertical position.
Note: Torque actuator shaft clamp
screw to 88 in./lbs. (9.9Nm).
No.
Part Number
Qty
Description
1
MS actuator
2
415455
4
1
⁄
4
- 20 spinlock nut
3
415586
4
#14 x
3
⁄
4
TEK SMS
4
415934
1
#10-24 nylock nut
5
416048
1
1
⁄
4
x
3
⁄
8
shoulder bolt
6
815027
1
standoff bracket
7
723089
1
mounting bracket
8
415609
4
thread stud
Safety Warning
Equipment damage or electrical power hazard. Line
voltage can cause death or serious injury and short
equipment circuitry. Disconnect power supply before
installation.
These instructions apply to the external field installation of Honeywell actuators on Greenheck model VCD control
dampers when they are duct mounted or sleeved.
®
Honeywell MS4120 MS4620 MS8120
1
®
Document 464287
Honeywell Actuators Direct Drive
MS4120, MS4620, MS8110, MS8120,
MS7510, and MS7520
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety information. Failure
to comply with these instructions will result in voiding of the product warranty and may result in personal injury
and/or property damage.
