3
1.2 Electricity Related Warnings
• Do not pull the power cord when unplugging the freezer. Please firmly
grasp the plug and pull out it from the socket directly.
• Do not damage the power cord under any condition, do not use when the
power cord is damaged or the plug is worn.
• Replace worn or damaged power cord in manufacturer-authorized
maintenance stations.
• To prevent a fire, the power plug should be firmly contacted with the
socket. Please ensure that the grounding electrode of the power socket is
equipped with a reliable grounding line.
• In case of a gas leak, please turn off the valve of the leaking gas and
then open the doors and windows. Do not unplug the freezer and other
electrical appliances since that spark may cause a fire.
• To ensure safety, it is not recommended to place regulators, rice cookers,
microwave ovens and other appliances on the top of the freezer, unless
recommended by the manufacturer.
1.3 Related Warnings for Use
• Do not arbitrarily disassemble or reconstruct the freezer, nor damage the
refrigerant circuit. Maintenance of the appliance must be conducted by a
specialist.
• Damaged power cord must be replaced by the manufacturer, its
maintenance department, or related professionals in order to avoid danger.
• To prevent injury, do not to put your hand between the freezer doors and
body. Please be gentle when opening the door to avoid falling items.
• To avoid frostbite, do not handle food or containers, especially metal, with
wet hands in the freezing chamber when the freezer is running.
• Do not allow children to enter or climb the freezer to prevent entrapment or
injury.
• Do not spray, wash, or put the freezer in moist places or places where it can
be easily splashed with water to protect the electrical insulation properties.
• Do not place heavy objects on the top of the appliance. Objects may fall
when opening the door, and may cause accidental injury.
• Please pull out the plug in case of power failure or cleaning. Do not connect
the freezer to power supply within five minutes to prevent damages to the
compressor due to successive starts.
